Keysight N9322C - Page 157

149
Command Reference
Channel Scanner Option Subsystem
Min Hold Dwell Time
:CHSCanner:SWEep:MINHold:DWELltime <value>
:CHSCanner:SWEep:MINHold:DWELltime?
Use this command to define the min hold dwell time of
channel scanner measurement mode.
Example: :CHSCanner:SWEep:MINHold:DWELltime 10s
Key access: Trace > Min Hold
Average State
:CHSCanner:SWEep:AVERage[:STATe] OFF|ON|0|1
:CHSCanner:SWEep:AVERage[:STATe]?
Use this command to turn on/off average state in channel
scanner mode. It’s only available for List sweep mode.
Example: :CHSCanner:SWEep:AVERage ON
Key access: Trace > Average
Average Count Number
:CHSCanner:SWEep:AVERage:COUNt <value>
:CHSCanner:SWEep:AVERage:COUNt?
Use this command to define the average count number.
Range: 1 to 1024
Example: :CHSCanner:SWEep:AVERage:COUNt 1024
Key access: Trace > Average
Average Mode
:CHSCanner:SWEep:AVERage:MODE EXP|REPeat
:CHSCanner:SWEep:AVERage:MODE?
Toggle the average mode between EXP mode and Repeat
mode
Example: :CHSCanner:SWEep:AVERage:MODE EXP
Key access: Trace > Average Mode