Keysight N9322C - Page 196

Command Reference
Demodulation Option Subsystem
188
ASK Y Reference Value
:DISPlay:ASK:VIEW:WINDow:TRACe:Y[:SCALe]:RVALue
<real>
:DISPlay:ASK:VIEW:WINDow:TRACe:Y[:SCALe]:RVALue?
Use this command to specify reference value of Y axis.
Range: –150% to 150%
Example: :DISPlay:ASK:VIEW:WINDow:TRACe:Y:RVALue –1
Key access: Shift > Disp > Y Scale > Ref Value
ASK Y Scale/DIV
DISPlay:ASK:VIEW:WINDow:TRACe:Y[:SCALe]:PDIVi-
sion <real>
DISPlay:ASK:VIEW:WINDow:TRACe:Y[:SCALe]:PDIVi-
sion?
Use this command to specify scale per division of Y axis.
Range: 0.1% to 100%
Example: :DISPlay:ASK:VIEW:WINDow:TRACe:Y:PDIVision 1.2
Key access: Shift > Disp > Y Scale > Scale /DIV
ASK Y Reference Position
:DISPlay:DMA:VIEW:WINDow:TRACe:Y[:SCALe]:RPOSi-
tion TOP|CENTer|BOTTom
:DISPlay:DMA:VIEW:WINDow:TRACe:Y[:SCALe]:RPOSi-
tion?
Use this command to specify the reference position of Y
axis.
Range: TOP, CENTer, BOTTom
Example: :DISPlay:DMA:VIEW:WINDow:TRACe:Y:RPOSition TOP
Key access: Shift > Disp > Y Scale > Ref Position