55
Command Reference
System Subsystem
Set System Date
:SYSTem:DATE <“yyyymmdd”>
:SYSTem:DATE?
Sets the system date of the real- time clock of the
instrument. Year is a 4- digit integer. Month is an integer 1
to 12. Day is an integer 1 to 31 (depending on the month)
Example: :SYSTem:DATE “20120912”
Key access: System > Time/Date > Date
System Time Zone Offset
:SYSTem:TIME:ZONE <value>
:SYSTem:TIME:ZONE?
Sets the time zone offset. The offset is set according to the
Greenwich Mean Time. Below example sets the time zone
offset to 8 hours.
Example: :SYSTem:TIME:ZONE 8
Key access: System > Time/Date > Time Zone Offset
Run Lasted Time Query
:SYSTem:PON:TIME?
This query returns the time that has elapsed since the
analyzer was last turned on.
Language Type
:SYSTem:LANGuage
SCHINESE|TCHINESE|ENGLISH|FRENCH|GERMAN|ITALIAN|
JAPANESE|KOREAN|PORTUGUESE|RUSSIAN|SPANISH
:SYSTem:LANGuage?
Sets the language type for the soft key menu display. The
language type setting is included in the setup(*.SET) file.
Example: :SYSTem:LANGuage SCHINESE
Key access: System > Language Type
To Next Page
Loading...
