Keysight N9322C - Page 80

Command Reference
Sense Subsystem
72
Stop Frequency
[:SENSe]:FREQuency:STOP <freq>
[:SENSe]:FREQuency:STOP?
Set the stop frequency of the spectrum analyzer.
*RST: 7.0 GHz
Default Unit: Hz
Example: :FREQuency:STOP 3 GHZ
Key access: Freq > Stop Freq
Center Frequency Step
[:SENSe]:FREQuency:CENTer:STEP[:INCRement] <freq>
[:SENSe]:FREQuency:CENTer:STEP[:INCRement]?
Specifies the center frequency step size.
*RST: 300 MHz
Example: :FREQuency:CENTer:STEP 2 GHz
Key access: Freq > CF Step Man
Center Frequency Channel Step
[:SENSe]:FREQuency:CENTer:STEP[:INCRement]:CHANnel
<channel>
[:SENSe]:FREQuency:CENTer:STEP[:INCRement]:CHANnel?
Specifies the center frequency Channel Step.
Example: :FREQuency:CENTer:STEP:CHANnel 3
Key access: Freq > More > CF Step Man
Frequency Unit
[:SENSe]:FREQuency:UNIT FREQuency|CHANnel
[:SENSe]:FREQuency:UNIT?
Toggle the frequency unit between frequency and chanel.
Example: :FREQuency:UNIT CHANnel
Key access: Freq > Unit