To Next Page

To Previous Page

Command Reference

Sense Subsystem

Sweep Mode

[:SENSe]:SWEep:MODE AUTO|FFT|SWEep

[:SENSe]:SWEep:MODE?

Sets the sweep mode manually.

*RST: AUTO

Key access: Shift > Sweep > Sweep Setup > Sweep Type

Gated Sweep State

[:SENSe]:SWEep:EGATe[:STATe] OFF|ON|0|1

[:SENSe]:SWEep:EGATe[:STATe]?

Use this command to turn on/off gated sweep mode.

Example: :SWEep:EGATe ON

Key access: Shift > Sweep > Gated Sweep > Gated Sweep > On/Off

Gate View

[:SENSe]:SWEep:EGATe:VIEW ON|OFF|1|0

[:SENSe]:SWEep:EGATe:VIEW?

Use this command to turn on/off gate view. The gated view

can be enable when the gated sweep is turned on.

Example: :SWEep:EGATe:VIEW ON

Key access: Shift > Sweep > Sweep Setup > Gated Sweep > Gate View > On

Gate View Sweep Time

[:SENSe]:SWEep:EGATe:TIME <time>

[:SENSe]:SWEep:EGATe:TIME?

Set the gated view sweep time. The time unit of this

command is second.

Example: :SWEep:EGATe:TIME 0.002

Key access: Shift > Sweep > Sweep Setup > Gated Sweep > View Sweep Time

Keysight N9322C User Manual

Questions and Answers: