87
5
5
Features of your vehicle Lighting
light film which could interfere with
sensor operations.
僅 If your vehicle has window tint or
other types of metallic coating on the
front windshield, the auto light system
may not work properly.
Operating high beam
To turn on the high beam headlamp:
僅 Push the lever away from you.
The lever will return to its original
position.
The high beam indicator will light
when the headlight high beams are
switched on.
To prevent the battery from being dis
-
charged, do not leave the lights on for
a prolonged time while the vehicle is
off.
High Beams
Do not use high beam when there are
other vehicles in front of or approaching
your vehicle. Using high beam could
obstruct the other driver's vision.
To flash the headlights:
僅 Pull the lever towards you.
It will return to the normal (low beam)
position when released. The head
-
light switch does not need to be on to
use this flashing feature.
Operating turn signals and lane
change signals
The EV button must be on for the turn
signals to function.
To turn on the turn signals:
僅 Move the lever up or down (A).
The green arrow indicators on the
instrument panel indicate which turn
signal is operating.
They will self-cancel after a turn is
completed. If the indicator continues
to flash after a turn, manually return
the lever to the OFF position.
To signal a lane change:
僅 Move the turn signal switch slightly
and hold it in position (B).
The lever will return to the OFF posi
-
tion when released.
If an indicator stays on and does not
flash or if it flashes abnormally, one of
the turn signal bulbs may be burned out
and will require replacement.
One-touch lane change function
To activate a one-touch lane change
function, move the turn signal lever
slightly and then release it. The lane
change signals will blink 3, 5 or 7 times.
You can activate or deactivate the One
Touch Turn Signal function or choose
the number of blinking (3, 5, or 7) by
To Next Page
Loading...
