Features of your vehicle
1225
Audio system
Setting the default mode
Press and hold the button to select the
default mode for the control panel.
僅 After the setting, the control panel will
return to the default mode after a cer
-
tain period of time even if the control
panel is switched to the different
mode.
僅 If the mode is set to 'OFF', the control
panel will display the mode used
recently.
How vehicle radio works
FM reception
AM and FM radio signals are broadcast
from transmitter towers located around
your city. They are intercepted by the
radio antenna on your vehicle. This sig
-
nal is then processed by the radio and
sent to your vehicle speakers.
However, in some cases the signal com
-
ing to your vehicle may not be strong
and clear.
This can be due to factors, such as the
distance from the radio station, close
-
ness of other strong radio stations or the
presence of buildings, bridges or other
large obstructions in the area.
AM reception
AM broadcasts can be received at
greater distances than FM broadcasts.
This is because AM radio waves are
transmitted at low frequencies. These
long distance, low frequency radio
waves can follow the curvature of the
earth rather than traveling straight. In
addition, they curve around obstructions
resulting in better signal coverage.
FM radio station
To Next Page
Loading...
