47
7
7
Driver assistance system Manual Speed Limit Assist (MSLA)
Manual Speed Limit Assist
(MSLA)
1
Speed Limit indicator
2
Set speed
You can set the speed limit when you do
not want to drive over a specific speed.
If you drive over the preset speed limit,
the warning function operates (set
speed limit will blink and chime will
sound) until the vehicle speed returns
within the speed limit.
Manual Speed Limit Assist opera
-
tion
Setting speed limit
1. Press and hold Driving Assist ( ) but
-
ton at the desired speed.
The speed limit indicator ( )
light will appear and the set speed
limit will be displayed on the cluster.
2. Push the + switch up or - switch down,
and release it at the desired speed.
Push the + switch up or - switch down
and hold it. The speed will increase or
decrease to the nearest multiple of
five (multiple of ten in km/h) at first,
and then increase or decrease by 5
mph (10 km/h).
3. If you would like to drive over the pre
-
set speed limit, depress the accelera
-
tor pedal.
The set speed limit (1) will blink and
chime will sound until you return the
vehicle speed within the speed limit.
When the accelerator pedal is not
depressed beyond the pressure point,
vehicle speed will maintain within the
speed limit.
Temporarily pausing Manual
Speed Limit Assist
Press the ( ) switch to temporarily
pause the set speed limit. The set speed
limit will turn off but the Speed Limit
indicator ( ) will stay on.
To Next Page
Loading...
