Driver assistance system
347
Blind-Spot Collision-Avoidance Assist (BCA)
When the vehicle is stopped due to
emergency braking, the warning mes
-
sage will appear on the cluster. For your
safety, the driver should depress the
brake pedal immediately and check the
surroundings.
僅 Brake control will end after the vehicle
is stopped by emergency braking for
approximately 2 seconds.
Take the following precautions when
using Blind-Spot Collision-Avoidance
Assist:
僅 For your safety, change the Blind-
Spot Safety system Settings after
parking the vehicle at a safe location.
僅 If any other function's warning mes
-
sage is displayed or audible warning
is generated, Blind-Spot Collision-
Avoidance Assist's warning message
may not be displayed and audible
warning may not be generated.
僅 You may not hear the warning sound
of Blind-Spot Collision-Avoidance
Assist if the surrounding is noisy.
僅 Blind-Spot Collision-Avoidance Assist
may not operate if the driver applies
the brake pedal to avoid collision.
僅 When Blind-Spot Collision-Avoidance
Assist is operating, braking control by
the function will automatically cancel
when the driver excessively depresses
the accelerator pedal or control the
steering wheel.
僅 During Blind-Spot Collision-Avoidance
Assist operation, the vehicle may stop
suddenly injuring passengers and
shifting loose objects. Always have the
seat belt on and keep loose objects
secured.
僅 Even if there is a problem with Blind-
Spot Collision-Avoidance Assist, the
vehicle's basic braking performance
will operate normally.
僅 Blind-Spot Collision-Avoidance Assist
does not operate in all situations or
cannot avoid all collisions.
僅 Blind-Spot Collision-Avoidance Assist
may warn the driver late or may not
warn the driver depending on the
road and driving conditions.
僅 Driver should maintain control of the
vehicle at all times. Do not depend on
Blind-Spot Collision-Avoidance Assist.
Maintain a safe braking distance, and
if necessary, depress the brake pedal
to reduce driving speed or to stop the
vehicle.
僅 The brake control may not operate
properly depending on the status of
ESC (Electronic Stability Control).
There will only be a warning when:
- The ESC (Electronic Stability Con
-
trol) warning light is on
- ESC (Electronic Stability Control) is
engaged in a different function
The images or colors may be displayed
differently depending on the specifica
-
tions of the instrument cluster or theme.
Blind-Spot Collision-Avoidance
Assist malfunction and limitations
Blind-Spot Collision-Avoidance
Assist malfunction
To Next Page
Loading...
