45
9
9
Maintenance Appearance care
1. Using a flat-blade screwdriver, gently
pry the lamp assembly from interior.
2. Remove the cover from the lamp
assembly.
3. Remove the bulb by pulling it straight
out.
4. Install a new bulb in the socket.
5. Install the cover to the lamp assembly.
6. Install the lamp assembly to interior.
Prior to working on the Interior lamps,
ensure that the "OFF" button is
depressed to avoid burning your fingers
or receiving an electric shock.
Appearance care
Use the information in the following sec
-
tions to keep the exterior and interior of
your vehicle clean.
Exterior care
Use the information in the following sec
-
tions to maintain the exterior of your
vehicle. Keeping the exterior clean is not
only aesthetically pleasing, but it also
helps to prolong the life of the vehicle.
If you park the vehicle around a stainless
steel signboard or building windshield
etc., the plastic exterior trim (bumper,
spoiler, garnish, lamp, outside mirror
etc.) may be damaged by reflected sun
-
light from the external structure. To
avoid damaging the plastic exterior trim,
park the vehicle away from the areas
where the reflected light may occur or
use a vehicle cover (Depending on the
vehicle, the type of exterior trim applied
such as spoiler may differ).
Exterior general caution
It is very important to follow the label
directions when using any chemical
cleaner or polish. Read all warning and
caution statements that appear on the
label.
Finish maintenance
Washing
To help protect your vehicle's finish from
rust and deterioration, wash it thor
-
oughly and frequently at least once a
month with lukewarm or cold water.
If you use your vehicle for off-road driv
-
ing, you should wash it after each off-
To Next Page
Loading...
