What to do in an emergency
148
If you have a flat tire (with Tire Mobility Kit)
Before using the Tire Mobility Kit, follow
the instructions on the sealant bottle.
Remove the label with the speed restric
-
tion from the sealant bottle and apply it
to the steering wheel.
Please note the expiration date on the
sealant bottle.
The sealant bottle and insert hose (3)
cannot be reused.
Before using the tire repair kit, please
read carefully the instruction attached
on the sealant bottle. Detach the speed
limit label on the sealant case and put it
on a highly visible place. Always drive
within the speed limit.
Using the Tire Mobility Kit
Carefully follow below steps.
1. Shake the sealant bottle.
2. Remove the sealant bottle cap and
sealant bottle holder cap and screw
the bottle onto the sealant bottle
holder.
3. Unscrew the valve cap from the valve
of the defective wheel and screw fill
-
ing hose of the sealant bottle onto the
valve.
If a visible foreign object has punctured
the tire, do not remove it before using
Tire Mobility Kit.
If the sealant is injected when the tire air
pressure injection valve and sealant
injection hose are not fully interlocked,
the sealant may overflow and clog the
valve.
4. Make sure the compressor valve on
the filling hose is locked.
5. Ensure that the compressor is
switched off, position 0.
To Next Page
Loading...
