51
7
7
Driver assistance system Intelligent Speed Limit Assist (ISLA)
speed limit', 'Warning overspeed' and
'Changing set speed'.
Intelligent Speed Limit Assist warning
and control are described based on the
Offset set to
0
. For details on Offset set
-
ting, refer to "Intelligent Speed Limit
Assist settings" on page 7-49.
Displaying speed limit
Speed limit information is displayed on
the instrument cluster.
僅 If speed limit information of the road
cannot be recognized, '---' sign will be
displayed. Please refer to "Limitations
of Intelligent Speed Limit Assist" if the
road signs are difficult to recognize.
僅 Intelligent Speed Limit Assist provides
additional road sign information in
addition to speed limit. The additional
road sign information provided may
vary according to your country.
僅 Supplementary sign displayed under
the speed limit or overtaking restric
-
tion sign means the conditions under
which the signs must be followed. If
the supplementary sign is not recog
-
nized, it will be displayed as blank.
Warning overspeed
When driving at a speed higher than the
displayed speed limit, the red speed limit
indicator will blink.
Changing set speed
If the speed limit of the road changes
during the operation of Manual Speed
Limit Assist or Smart Cruise Control, an
arrow in the direction of up or down is
displayed to inform the driver that the
set speed needs to be changed. At this
time, the driver can change the set
speed according to the speed limit by
using the + or - switch on the steering
wheel.
僅 If the Offset is set over
0
, the set
speed will change to a higher speed
than the speed limit of the road. If you
want to drive below the speed limit,
set the Offset under
0
or use the -
To Next Page
Loading...
