35
9
9
Maintenance Fuses
3. Remove the nuts shown in the picture
above.
4. Replace the fuse with a new one of
the same rating.
5. Reverse these steps to reinstall the
multi fuse.
Do not disassemble nor assemble the
multi fuse when it is secured with nuts
and bolts. Incorrect or partial assembly
torque may cause a fire. Have the vehi
-
cle checked by an authorized Kia dealer.
Main fuse
If the main fuse is blown, it must be
removed as follows:
1. Turn the EV button and all other
switches off.
2. Disconnect the negative battery cable.
3. Remove the nuts shown in the picture
above.
4. Replace the fuse with a new one of
the same rating.
5. Reverse these steps to reinstall the
multi fuse.
The electronic system may not function
correctly even when the motor compart
-
ment and internal fuse box's individual
fuses are not disconnected. In such a
case, the cause of the problem may be
disconnection of the main fuse (BFT
type), which is located inside the positive
battery terminal (+) cap.
Since the main fuse is designed more
intricately than other parts, have the
vehicle checked by an authorized Kia
dealer.
Visually inspect the battery cap for
secure closing. If the battery cap is not
securely latched, the electrical system
may be damaged to due influx of mois
-
ture into the system.
To Next Page
Loading...
