Safety features of your vehicle
104
Seat
Seatback angle (2)
To recline the seatback:
僅 Push the control switch forward or
backward to move the seatback to the
desired angle. Release the switch
once the seat reaches the desired
position.
Seat height/tilt (3)
To change the height of the seat:
僅 Pull the front portion of the control
switch up to raise or press down to
lower the front part of the seat cush
-
ion. Pull the rear portion of the control
switch up to raise or press down to
lower the seat cushion. Release the
switch once the seat reaches the
desired position.
Lumbar support for driver's seat
(if equipped)
The lumbar support can be adjusted by
pressing the lumbar support switch on
the side of the seat.
1. Press the front portion of the switch
(1) to increase support, or the rear
portion of the switch (2) to decrease
support.
2. Release the switch once it reaches the
desired position.
Seatback pocket (if equipped)
There is a pocket (1) in the front seat
back for storing simple books or atlases,
and USB charger (2) (if equipped) for
rear passengers.
Seatback Pockets
Do not put heavy or sharp objects in the
seatback pockets. In an accident they
could come loose from the pocket and
injure vehicle occupants.
To Next Page
Loading...
