Kidde VS1 - Page 92

Chapter 2: Front panel programming
82 P/N 3102351-EN • REV 005 • ISS 28DEC18
• Loop class programming
•
Zone programming
• Reset inhibit
• Auto signal silence
• In-suite signal silence
• Day start
• Night start
• Daylight savings
• Date
• Aux power reset
• LCD banner
• Key #1
• Key #2
• Standalone Op
Advanced programming for panel and loop options is covered in the following topics in this
chapter.
Programming events
Advanced programming lets you create custom responses to these types of events:
• Panel events
• Loop events
• Panel event corrs (correlations)
Advanced programming for panel and loop events is covered in the last two topics in this
chapter.
Changing loop configuration options
Loop configuration options
Loop configuration includes the following programmable options:
Table 25: Loop configuration options
Option
Description
Loop class
Indicates whether the loop is wired Class A or Class B.
Zone
Select this option to add a zone.
Correlation Groups
Select this option to add correlation groups.
Device
Select this option to add devices.
Mapping
Select Yes to enable mapping. Select No to disable mapping.
Loop 2 Enable [1]
Select Yes to enable Loop 2. Select No to disable Loop 2. [1]