Kidde VS1 - Page 93

Chapter 2: Front panel programming
P/N 3102351-EN • REV 005 • ISS 28DEC18 83
Option
Description
Loop 2 Fst Grp [1] [2]
Select:
001 to 025 to combine loop 1 and 2 devices in the same fast groups
— or —
101 to 125 to use separate fast groups for loop 2 devices.
Loop 3 Enable [1]
Select Yes to enable loop 3. Select No to disable loop 3. [1]
Loop 3 Fst Grp [1] [2]
Select:
001 to 025 to combine loops 1 and 3 devices in the same fast groups
— or —
126 to 150 to use separate fast groups for loop 3 devices.
Loop 4 Enable [1]
Select Yes to enable loop 4. Select No to disable loop 4. [1]
Loop 4 Fst Grp [1] [2]
Select:
001 to 025 to combine loops 1 and 4 devices in the same fast groups
— or —
151 to 175 to use separate fast groups for loop 4 devices.
[1] Displayed in multiple loop systems only.
[2] See “Programming fast groups for sounder bases” on page 89.
Most options have a factory default setting that you can accept or change.
See “Factory default settings” on page 42.
To change loop configuration options:
1. Press the menu button and choose Program.
2. Choose Advanced Program.
3. Enter a level two password.
4. Choose Loop Configuration.
5. Program the options.
Correlation group programming
This section includes instructions for:
• Using fast groups
• Adding members to correlation groups
• Setting the activation count
• Copying members of a correlation group
• Removing all members from a correlation group