Kinco KS Series - Page 49

Kinco-KS series
49
2,When using free protocol instruction （ CAN_INIT 、 CAN_WRITE 、 CAN_READ 、
CAN_RX）,CH parameters in KS105C1 is 1. 0 is CAN1 and 1 is CAN2 in KS105C2.
3,CAN slave
Pls enable CANopen slave for programming configuration. Setup baud rate and ID.(Real
ID+ switch)
B:CANopen slave protection only support heartbeat files. Pls download EDS from Kinco
website.
The storage area as below,