nformation
An upgrade kit is available for the standard variant. It makes it possible to toggle
between extra 1 and extra 2 or alternatively between tilt and extra.
The High Flow variant offers an extra function for a higher oil flow.
• Control via two double-acting hydraulic circuits, integrated valves for
switching between functions.
• Circuit I controls the rotation function.
• Circuit II controls the tilt function, extra function and the quick coupler, which
cannot be used simultaneously. (Safety circuit integrated for hydraulic quick
coupler).
• Separate overflow oil line (for attachments).
• Electrical swivel (12x 0.5 A) optional.
2.3. Intended use
The NOX Tiltrotator is an infinitely rotating and tiltable attachment.
Its infinite rotation of 360° and tilting angle of up to 2x 50° enables universal use.
When a quick coupler is attached, the used attachments, such as a bucket, HPX
grab, fork set, levelling shield, compressor and gripper, can be used with higher
degrees of freedom than a rotator.
2.4. Foreseeable misuse
During daily work, it’s possible that routines cause operating errors to occur
or that instructions are ignored. This can be caused by inadequate attention or
inadequate knowledge on the part of the operator.
• Do not beat or break with the attachment to break up conglomerate rock or
other material.
• Do not use the attachment for compacting material.
• For cardanically mounted attachment: Do not use the attachment to pull or
push a load by applying lateral pressure.
• Do not operate the attachment in such a manner, in which external forces are
caused that exceed the allowable loads and moments of the attachment.
foreseeable
To Next Page
