KINSHOFER TR07 - Maintenance Check List

Maintenance and service
30.03.2020
TR07-TR11-TR14-TR19-TR25
59
8.1.4. Maintenance check list
Maintenance intervals
Daily
Lubrication
1, 2
Check hydraulic connections for leaks and tighten if necessary
Check bolt(ed) connections, replace loose screws, bolts and apply adhesive
Check pinned joints and safety parts, tighten or replace if necessary
Check for: deformation, cracks, wear, smooth running
Every 500 operating hours
Expert inspection for functional safety, corrosion, deformation, cracks, wear, smooth running
Annually or every 1500 operating hours
Expert inspection for functional safety, corrosion, deformation, cracks, wear, smooth running
Crack checking by means of die penetration process according to EN 571 and EN ISO 3452
Replace hydraulic fluid
2
Replace transmission lubricant in the rotary drive
3
Every 6 years
Replace hydraulic hoses
Commissioning after extended shut down (from 1 month)
Lubrication
1, 2
Check bolt(ed) connections, replace loose screws, bolts and apply adhesive
Check pinned joints and safety parts, tighten or replace if necessary
Check hydraulic connections for leaks and tighten if necessary
Check for cracks, wear, corrosion and functional safety
Check or replace seals
See operating instructions in chapter:
1
Overview greasing points
2
Oil and grease
3
Transmission lubricant oil volume (see table Technical data).
Location, Date
Stamp with signature