1.4. Transport, Unloading and Packaging
The attachment is carefully packed by the manufacturer in order to avoid damage
during transportation.
Personal injuries and damage to property can be caused by lifted loads
falling down.
• Observe the weight information and any symbols which are attached to the
transportation packaging.
• Use lifting equipment with sufficient carrying capacity to unload the
attachment from the transport vehicle.
1.5. Incoming goods inspection
Unpack the delivered goods carefully so that no parts remain in the packaging.
Immediately after unpacking, check:
• The attachment as well as any accessory parts delivered with it for transport
damage and defects.
• The completeness of the delivery with reference to the delivery note.
Use the original packaging for any return shipping. Dispose of the packaging in
accordance with regional regulations.
1.6. Service link
• Spare parts
• Technical support
• Returns
http://www.kinshofer.com/eng/index .php/en/service
To Next Page
