TM
Model 3000M0188-01
Rev. 9/17 2-3
Machine Operation
4. Connect hydraulic hoses to tractor ports in a sequence familiar and comfortable to the operator.
NOTE: If tractor is equipped with an adjustable flow outlet (SCV), set to full flow position.
5. Connect ASABE Standards 7 terminal connector for safety/warning lights on planter to ASABE Standards
receptacle on tractor. If your tractor is not equipped with an ASABE Standards receptacle, check with your tractor
manufacturer for availability. Check warning lights on planter work in conjunction with warning lights on tractor.
6. Raise jack stand and remount horizontally on storage bracket.
Jack stand installed
Jack stand stored
Pressurized hydraulic fluid can penetrate
body tissue and result in death, serious
infection, or other injuries. Fluid injected
under skin must be IMMEDIATELY
removed by a surgeon familiar with this
type of injury. Make sure connections
are tight and hoses and fittings are
not damaged before applying system
pressure. Leaks can be invisible. Keep
away from suspected leaks. Relieve
pressure before searching for leaks or
performing any system maintenance.
WARNING
Wipe hose ends to remove any dirt
before connecting couplers to tractor
ports or contamination may cause
equipment failure.
NOTICE
To Next Page
Loading...
