M0188-01Model 3000
7-6 Rev. 6/11
TM
Lubrication and Maintenance
GREASE FITTINGS
Lubricate parts with grease fittings at frequency indicated with an SAE multipurpose grease. Clean fitting thoroughly
before greasing. Frequency of lubrication is based on normal operating conditions. Severe or unusual conditions
may require more frequent attention.
NOTE: Numbers on illustration below correspond to photos on following pages showing lubrication
frequencies.
Model 3000 6 Row 30" (70 cm) Planter Shown
1. Conventional Row Marker Assembly - 4 Per
Assembly
2. Low Profile Row Marker Assembly - 2 Per
Assembly
To Next Page
Loading...
