M0188-01Model 3000
7-10
Rev. 9/17
TM
Lubrication and Maintenance
MOUNTING BOLTS AND HARDWARE
Before operating planter for the first time, check all hardware is tight. Check all hardware again after first 50 hours of
operation and beginning of each planting season.
All hardware used on the Kinze planter is Grade 5 (high strength) unless otherwise noted. Grade 5 cap screws are
marked with three radial lines on the head. Hardware must be replaced with equal size, strength, and thread type.
Loose transport wheel lug bolts can
result in wheel separation from planter
and result in death, serious injury, and
damage to property and equipment.
Check transport wheel lug nut torque
before operating planter for the first time
and periodically thereafter.
WARNING
Over-tightening hardware can reduce
its shock load capacity and cause
equipment failure.
NOTICE
To Next Page
Loading...
