20 | USING THE STAND MIXER
USING THE STAND MIXER
5
Plug into proper electrical outlet.
6
To remove: Turn speed control
to “0”. Unplug Stand Mixer.
7
Loosen attachment knob by
turning it counterclockwise. Rotate
attachment slightly back and forth
while pulling out.
8
Replace attachment hub cover.
Tighten attachment knob by turning
it clockwise.
NOTE: See the Use and Care Guide of each specific attachment for recommended
speed settings and operating times.
W10863290A_01_EN_v06.indd 20 3/30/16 11:18 AM
To Next Page
Loading...
