KitchenAid 5KHB2571 - Operating Your Hand Blender; Initial Hand Blender Assembly Guide

OPERATING YOUR HAND BLENDER | 13
ENGLISH
OPERATING YOUR HAND BLENDER
ASSEMBLING THE HAND BLENDER
Before using the KitchenAid Hand Blender
for the first time, wipe the motor body and
attachment adapters with a clean, damp
cloth to remove any dirt or dust. Mild dish
soap may be used, but do not use abrasive
cleansers.
NOTE: Do not immerse the motor body
or the adapters in water.
Dry with a soft cloth. Wash all the other
attachments and accessories by hand or
in the top rack of the dishwasher. Dry
thoroughly.
Chopper Adapter*
Bell Guard
Easily snaps onto Bell Blade and provides
protection to blades while the Hand
Blender is not in use.
Pan Guard
The Pan Guard snaps onto any of the
included Bell Blades and provides
protection to the Hand Blender and your
cookware.
Port
For information on attaching or removing
the Chopper adapter, see the “Using the
Chopper Attachment” section.
Whisk Adapter
* Included only in model 5KHB2571
NOTE: Always be sure to unplug the
power cord from the wall socket before
installing or removing attachments.
NOTE: Ensure Bell Guard is installed with
the mounting clips positioned between
the ports on the Bell Blades.
Port
Blending Arm
Attachment
NOTE: Ensure Pan Guard is installed with
the mounting clips positioned between
the ports on the Bell Blades.
W11282498A.indb 13 10/16/2018 2:29:57 PM