SECTION 2
INSTALLATION
Jan 2003
p. 2-4
80074800
in galling of the parts, and will generally render them unusable. Do not use
High Purity Goop on ANYTHING but stainless steel!
Drain:
Cutting water released in the activation of EMERGENCY STOP will be
discharged from the intensifier drain port and must be piped to an appropriate
location (i.e. sewer line). The volume of water released will be minimal, and will
not require high-pressure plumbing. Piping must meet national and local piping
codes.
Compressed Air:
The facility air connection to the SL-IV Pump should provide clean, dry air at 85
PSIG. Air usage is minimal and less than 1 SCFM.
To Next Page
Loading...
Need help?
General
