Maintaining the Printer
November 2014 3-11
7. Remove a new alcohol pad from its packaging. Wipe the
cleaning roller with the pad.
8. Rotate the roller to clean the entire surface.
9. Allow the alcohol to dry completely (about five minutes)
before you resume printing.
10. Repeat steps 7-9 for the second cleaning roller.
11. Install the cover for the cleaning rollers.
12. Move the power switch to the On ( | ) position.
13. Load the paper. See “Loading the Paper” on page 2-8.
14. Install the front door waste bin, exit tray, and exit tray waste
bin (see “Installing the Front Door Waste Bin, Exit Tray, and
Exit Tray Waste Bin” on page 2-2).
To Next Page
Loading...
Need help?
General