5-8 November 2014
Tro u b l es h o o ti n g
To prevent damage to the printer, do not pull abruptly on the
paper.
10. Use both hands to manually rewind the paper onto the roll.
Be careful not to damage or mark any rollers.
11. Cut off damaged or printed areas of the paper.
12. Look inside the printer and carefully remove any pieces of
paper.
13. Carefully insert the cassette until it clicks into place.
14. Close the top door.
15. Close the front of the printer.
16. Load the paper. See “Loading the Paper” on page 2-8.
To Next Page
Loading...
Need help?
General