5-6
mode settings on the camera.
Approximate Picture Size (Still)—The approximate size of each picture
based on your Picture quality and Resolution selections. The actual
picture size can vary depending on the content of the picture.
Burst/Capture rate—The rate, in frames per second, at which pictures will
be taken. You can also set this setting through the Capture mode settings on
the camera.
Approximate Picture Size (Burst)—Based on the Picture Quality ,
Resolution , and Burst/Capture rate , the approximate size of the
burst picture series. The actual burst size can vary depending on the content
of the picture.
Interval (Timelapse)—The time between pictures, in hours and minutes.
The minimum time between pictures is 60 seconds for both the DC220 and
DC260. The maximum time between pictures is 1550 minutes for both
cameras. You can also set this setting through the Capture mode settings on
the camera.
Number of Pictures (Timelapse)—The total number of pictures to capture.
Approximate timelapse size—Based on the Picture Quality ,
Resolution , Interval , and Number of Pictures, the number of
pictures that can be taken and the total size of the timelapse picture series.
The actual timelapse size can vary depending on the content of the picture.
Storage status—Based on your current Picture Type settings, the number of
pictures you have stored on your memory card and the number of pictures
that can still be stored.
To Next Page
Loading...
Need help?
General
