《Machine Adjust》 Screen. From any screen, by touching 《Machine Adjust》,
it will be displayed.
①《Language Selection》：Selection of language displayed on the operation panel of C370G. You
can select English, Japanese, Simplified Chinese, Traditional
Chinese, Korean, Polish, Turkish, Indonesian, Thai, or Vietnamese.
②《Memory Write》：Enter the number you want to memorize the current setting with the
numeric keypad and press [SET] to write it to the memory. From “0” to
“500”
③《Memory Read》：Enter the number you want to read from the current setting with the
numeric keypad and press [SET] to read the memory.
④《Total Length Correction》：Only the cutting length is corrected.
⑤《Discharge Time》： Use this function when optional CC-100 （conveyer） is attached.
Minimum unit：0.1second
Left side is 「Timer 1」： Time from discharging the wire to starting the motion of the Push
Out Cover , after finishing of CASTING processing.
Center is 「Timer 2」： Time when the Push Out Cover is out.
Right side is 「Timer 3」： Time from returning to the original position of the Push Out Cover
to starting the processing of CASTING
To Next Page
Loading...