Danger
For safety precautions see Cap. 3.
5.4 Rubber hoses check
The check is carried out by exerting a slight deection or
bending along the pipe and near the hose clamps.
Components must be replaced if they have clear signs of
cracks, tears, cuts, leaks and do not retain a certain degree
of elasticity.
Important
• If hoses are damaged contact an authorized Lombardini
Marine workshop.
1 -
Check that the:
- Fuel system hoses A are intact.
- Hoses for the cooling circuit B1, B2, B3, and B4.
- Vent system pipes C.