Kolida K20s User Manual

K20s
- 38 -
Receiver Operate
The page provides all kinds of operations to control the receiver such as self-check operation,
clean epochs, factory reset, reboot and power off.
Self-check: Users can also do the self-check from this configuration page, click on the Check all
button to check all the modems or click on the check button corresponding to the modem to
check one by one.
Clean EPH: Click this button to clear the remaining epochs to let recever track the satellites
better.
Factory Default: Click this button to bring the receiver back to factory default setting.
Reboot: Click this button to restart the receiver.
Power Off: Click this button to power off the receiver.
System Setup
In this interface, we can set receiver voice prompt, voice volume, power saving mode, USB
mode and default language.

Kolida K20s Specifications

General

Brand	Kolida
Model	K20s
Category	Measuring Instruments
Language	English