Kolida K20s User Manual

K20s
- 39 -
Voice Prompt: Check on this box to turn on the voice guide for K20s, cancel it to turn off the
voice guide.
Voice Volume: Define the voice volume for K20‟s speaker.
Power: Configure the receiver to use the power saving mode or not.
USB: This is used to configure K20s what kind of mode output from 7-pin port when connect
the receiver with computer via USB cable. USB and network port for optional.
Default Language: Configure the default language for KOLIDA K20s.
Authority Zone: C means this receiver works in China only/ W means it works worldwide
§3.2.3 Satellite Information
The “Satellite Information” provides all kinds of tables, graph and the skyplot to view the
information of tracking satellites. And it is allowed to configure to use which satellite in
constellation on/off page by checking on the corresponding box.
Tracking Table
Here is the table to list all current used satellites and the other information for these satellites.

Kolida K20s Specifications

General

Brand	Kolida
Model	K20s
Category	Measuring Instruments
Language	English