Kolida K20s User Manual

K20s
- 43 -
Data Download
This interface is to download collected raw data.
§3.2.5 Data Transfer
This function contains General, Serial Port Config, TCP/IP Config, NTRIP Config and Data
Flow Config. The “Data Transfer” allows to configure the output mode for raw observation data
and differential data, as well as to the NTRIP performance configuration.
General
This page shows the service condition and the output contents of the ports, if the port item display in
green, that means the port is being used, and the port is not used while the item display in red.

Kolida K20s Specifications

General

Brand	Kolida
Model	K20s
Category	Measuring Instruments
Language	English