Name: Kolida K20s
Brand: Kolida
Rating: 4 (1 reviews)

To Next Page

To Previous Page

K20s

- 95 -

§6.2.6 Radio Router

This feature is used to transfer the correction which from the reference station for the other rover

by radio, the rovers will have the same coordindates from the reference station.

NOTE: This function should be used under Rover+Network mode.

Before configuring on this function, go to “Radio Parameters” interface to check which radio

channel value and what kind of protocol are being applied, please keep in mind on this channel

value and protocol that are selected to match on rovers later on.

Then choose “Network” for Datalink option and choose “internal radio” for Router option in

“General Config” page, click on “Enter” button to confirm the settings.

At this moment, configure the parameters for rover to access to the CORS server for corrections.

Then the other rovers are able to connect the rover router via internal radio with the same

channel value, after rovers have fixed solution, the base coordinates are same as CORS station.

Questions and Answers:

Need help?

Do you have a question about the Kolida K20s and is the answer not in the manual?

Kolida K20s Specifications

General