Kolida K20s User Manual

K20s
- 82 -
7) Radio channels setting
8) Go to “Config—Device Config—Radio Config” page.
9) In radio channel field, click on “Read” button to read the current channel value;
10) Select the same radio channel value as set on base station from the list and click on
“Switch” button to apply this channel value.
Using Web UI
1) Connect KOLIDA K20s with computer via 7-pin to USB cable and set the USB port to
output as Ethernet on K20s. (a driver is required to installed on computer to enable this

Kolida K20s Specifications

General

Brand	Kolida
Model	K20s
Category	Measuring Instruments
Language	English