23
To eject a card, open the card-slot door (1), and press and release the card-eject lever
to extend it (2).
Press the card-eject lever to eject the card (3). The card can now be pulled out. Take care
when removing the card as it becomes hot with use. The card-eject lever should remain
inside the camera body. If it extends, push it into the camera.
Insert a new memory card and close the card-slot door (4).
If the “Unable to use card. Format?” message appears, the card should be formatted with
the camera. Using the left/right keys of the controller, select “Yes” to format the card. “No”
closes the window without formatting the card; remove the unformatted card from the
camera. Formatting erases all data on the memory card permanently. Depending on the
memory card, formatting can take several minutes. A memory card can also be formatted
in section 1 of the playback menu (p. 116). A memory card used in another camera may
have to be formatted before being used.
If the card-error message appears, press the central button of the controller to close the
window; check the Konica Minolta web site for the latest compatibility information:
North America: http://www.konicaminolta.us/
Europe: http://www.konicaminoltasupport.com
2 31 4
To Next Page
Loading...
