If the shutter speed falls below the point
where the camera can be safely hand held,
the camera-shake warning appears on the
monitors regardless if Anti-shake is active.
Camera shake is slight blurring caused by
subtle hand motion and is more pronounced
at the telephoto position of the lens than at
the wide-angle. Although the warning
appears, the shutter can still be released.
If the warning appears when the shutter-
release button is pressed partway down,
place the camera on a tripod, use the flash,
Anti-shake, increase the camera sensitivity
(ISO) (p. 66), or zoom the lens towards the
wide-angle position until the warning
disappears.
35
CAMERA-SHAKE WARNING
Camera-shake indicator
To Next Page
Loading...
