Auto
To set the white balance to a specific light source.
Fluorescent 1 is for standard fluorescent lighting, and
fluorescent 2 is for daylight fluorescent lighting. For
information on light sources, see page 105.
Auto
White
Balance
61
To apply or calibrate custom white-balance. Up to two
custom white balance settings can be registered and
recalled. See the next page for further instructions.
Custom
white
balance
Tungsten
Shade
Fluorescent 1, 2 Flash
Daylight
Cloudy
Custom recall 1, 2Custom set
To automatically detect the type of light and adjust the
white balance accordingly. When the built-in flash is used,
the white balance is set for the color temperature of the
flash.
Auto
Preset
white
balance
To Next Page
Loading...
