Chapter 1 Overview
1-1
■
Product Specifications
●
Print Controller specification
Supported Printers:
IP-422: Konica 7022/7130 Copier
IP-423: Konica 7022/7130/7135 Copier
Paper: 5.5x8.5 / 8.5x11 / 8.5x14 / 11x17 / A3 / A4 / A5 / B4 / B5 / F4 /
(8K / 16K: Europe only)
Paper Feeding and
Amount of Feeding Paper: Same as the copier
Load Output Paper: Same as the copier
Mode: The dual operation of the copier and the printer is available
(5 jobs, including scanning jobs, can be processed at the maxi-
mum.)
Orientation: Portrait and Landscape
Resolution: Printing System: 600 x 600 dpi
Scanning System: 200 dpi / 300 dpi / 400 dpi / 600 dpi
Gradation: 1 bit
Number of print: 1 to 999
Continuous print speed:
IP-422: Max. 30 ppm/A4 or 8.5 x 11 (600 x 600 dpi)
IP-423: Max. 35 ppm/A4 or 8.5 x 11 (600 x 600 dpi)
Printable Area: Standard: Top and bottom Margins: 4.0 mm
Right and Left Margins: 4.0 mm
Non-standard: 297mm x 432mm
Warm-up time: Same as the copier
Basic Configuration:
CPU:
IP-422: AMD Elan SC520-133 MHz
IP-423: Intel Celeron 300A (300MHz)
System Memory: 64MB SD-RAM (Standard),
Expanded memory is installed in one expansion memory slot
IP-422: Expandable up to 128MB (Option)
IP-423: Expandable up to 192MB (Option)
Host Interface: Parallel port Centronics
(IEEE 1284 / amphenol 36 pin male connector)
Network Interface: Ethernet (100Base-TX/10Base-T)
Printer Description Language: PCL5e
Adobe PS3 (optional PS3 kit required)
Built-in fonts: Agfa Microtype fonts
Compliant OS: Windows 95/98/Me
Windows NT 4.0 (NT Service Pack 3 or more)
Windows 2000/XP
Mac OS 8.x or more (optional PS3 kit required)
* Mac OS X is not supported.
Printer Driver: Printer driver for Windows 95/98/Me
Printer driver for Windows NT 4.0/2000/XP
PS printer driver for Mac OS 8.x or higher
(optional PS3 kit required)
To Next Page
Loading...
