KORG D12 Guided Tour
13
Loop recording and playback:
Set specific in / out points in your song and loop the audio - then rehearse intricate parts to be recorded, or use the punch-in function
while looping, and add new data as the loop plays. Use the loop playback feature to audition specific regions of recorded audio.
Trigger Recording:
Set recording to begin automatically in response to an audio input!
Record Tap Tempo:
This function lets you record the tempo after you've recorded a song that has no tempo settings - a great feature! This way you can
then edit your tracks in units of measures or synchronize the D12 to external MIDI devices.
Use MIDI to automate D12 functions:
Besides using MIDI to synchronize the D12 to other devices (including another D-series recorder!), you can automate your mixes:
fader, pan, EQ, etc., parameters with an external sequencer, control the effects in real time, and change scenes via MIDI program
change messages!
Program Play function:
Playback multiple songs in any order, from the internal drive and external drives! This function is also great when mixing down to
DAT, MD, etc.
Normalize function:
Boosts the level of track data that was recorded at lower than optimal level, to the maximum volume without clipping.
Use the SUB INPUTS to send external signals directly to the Master bus:
Assign any of analog inputs 1-6 as Sub Inputs, and input the audio from an external sequencer in sync, direct to the D12's Master
bus, or record any external audio final pass, along with the internal tracks, direct to your mastering deck. You can also use the Sub
Inputs to return audio from an external processor connected to the AUX OUT.
Import and export WAV data:
Audio data in WAV format can be imported or exported via FAT16 DOS formatted SCSI external drives, and imported from ISO9600
Level1 format CD’s. WAV files can be copied to the D12’s clipboard for pasting into new song locations. For more information, see
the Owner’s Manual page 86.
To Next Page
Loading...
Need help?
General
