KORG D12 Guided Tour
6
PAN/BALANCE controls:
1. As the song continues to play, adjust the PAN knobs for Channels 1-6. The BALANCE knobs for tracks 7/8, 9/10, 11/12 should
all be set to the center position. (Refer to the Track Layout on page 4)
Note: When you reset the demo song to the beginning, the original settings for fader, pan, EQ, effect settings, and effect and aux
send levels will be reset to the values stored in the initial Scene (SCENE key is lit when “SceneRead:On” is set).
The D12 features a Channel Pairing function to group adjacent channels for controlling Track Status, Pan, EQ, Effect and Aux send
settings as well as fader position. See the Owner’s Manual page 102, for more information on channel pairing.
SCENE MEMORY mode:
The D12 features 100 -Scene Memory for "snapshot" automation of channel faders, pan, EQ and Effect settings and effect and aux
send levels. The Demo Song “I CAN’T WAIT” has an initial Scene stored. When the song is selected, the [SCENE] key will light
and the original mix settings will be recalled.
Note: More “hands-on” work with the SCENE function later in this guide.
SCENE MEMORY “MixView” tab:
The “MixView” tab is helpful when selecting and viewing the stored Scenes in a song.
1. Press [SCENE] (lit) until you select the “MixView” tab (in the display. As you mix, the display will indicate the changes you
make to the channel faders and pan/balance controls.
EQ mode:
1. Press [EQ/PHASE] until you select the “Eq1-4” tab (in the display. Here you'll see EQ settings for tracks 1-4.
2. u to any EQ "knob" icon in the display, and rotate the [DIAL] to make changes to the track EQ. The upper-left of the display
will indicate the track and EQ parameter that is highlighted.
3. As the song continues to play, press [EQ/PHASE] to select another “Eq” tab, and work with the track EQ settings. The upper-
left of the display will indicate the EQ parameter and track you are working with. Note: Use the Track Layout on page 4 of this
guide to reference tracks that you are working with in the demo song.
Lo, Mid and Hi EQ plus Mid frequency control for every track, available as you record, or during track playback!
The D12 features 3- band EQ for all tracks!