KORG D12 Guided Tour
9
SCRUB mode:
1. STOP playback, then press [SCRUB]. To select track waveform data: u to the
>
> popup button next to “1Tr”, then press
ENTER. u to select the track, press ENTER, then u to “OK” and press ENTER. Once you’ve selected a track, u to “Loc”
and use the [DIAL] to scrub the audio. The “zoom” buttons in the display let you resize the waveform.
2. u to “Loc”, then press [SCRUB] to return to the previous page.
Tip: Pressing [FF] while the SCRUB function is ON sets the audio data to play back at half-speed - an octave lower than the original
pitch. This is a great way to rehearse and learn intricate solo lines!
Note: More “hands-on” work with the SCRUB function later in this guide.
TUNER mode:
The D12 features a built-in auto-chromatic tuner!
1. [STOP] playback, then press [INPUT] until you select the “Tuner” tab. Here, you can tune an instrument connected to the
GUITAR IN or INPUT1 jack.
When you select the “Input 1” radio button, you can precisely tune connected instruments. If you select the “Track” radio button you
can check the tuning of any previously recorded track.
The Scrub function gives you precise control when working with your tracks!
To Next Page
Loading...
Need help?
General
