KORG D12 Guided Tour
23
Tip: In any song where Scene Memory is enabled (SCENE key lit when song is selected), the settings originally stored as
scenes will be recalled each time you restart the song. Disable Scene Memory if you want to edit, create or overwrite new
scenes in a song.
Additional tips when working with Scenes:
Creating multiple Scenes in a song:
You can create a number of scenes in a song, including fader, pan, EQ, effect settings and send levels, and AUX send levels. Try
working with the copied song “I CAN’T WAIT”, and add multiple scenes to your new mix. For example, there may be places in the
demo song where you’d like to pull out the vocal or keyboard audio. Just move to these locations, set the appropriate faders to “oo”,
and then store a new scene. Bring the faders back up at the point in time where you want the instruments back in the mix, and store
another scene for the new fader settings. Your scenes will playback seamlessly, when you playback the song with (“Scene Read:
On”).
To Copy Scenes to new time locations:
1. Press [SCENE] until you select the “ReadDel” tab.
2. Press to turn “SceneRead Off” (if it is On).
3. u to the SCENE number (top of display) and use the [DIAL] to select the Scene that you want to copy. (This can be done either
in ReadDel page or MixView page).
4. Press [SONG/CD], then set the “Counter” with the [DIAL], to select a location where you want to store the Scene you've just
selected. (This can also be done by playing and then stopping the song, or by pressing the REW or FF key.)
5. Press [SCENE], then press [STORE], followed by pressing [SCENE] again, to copy the scene to the new location.
6. In the SCENE “ReadDel” tab, press ENTER to turn “SceneRead On”.
Work with the Solo function:
The Solo function lets you isolate and monitor individual tracks, master effect sends and returns, and aux sends. The faders on the
D12 control both recording and monitoring levels, and a Cue Level function is provided for separate adjustment of level and pan
while you record.
1. Press [SONG/CD] to return to the main song menu. Make sure the copied demo song you’ve been working with is still selected.
2. Press [PLAY] to start playback of the song.
3. Press [SOLO/MONITOR] until you select the “Solo” tab (in the display:
4. As the song plays, u to the track “4” button, and press ENTER to solo the synth bass track.
To Next Page
Loading...
Need help?
General
