Korg NAUTILUS 88 User Manual

Creating songs (SEQUENCER mode)
112
About MIDI
Track status
You can specify whether each track will use the internal
NAUTILUS sounds, or use an external MIDI tone generator.
When the Track Status (Home– Mixer page) is set to INT or
Both, operating NAUTILUS’s keyboard and controllers will
sound and control NAUTILUS’s own tone generator.
When Status is set to EXT, EX2 or Both, operating
NAUTILUS’s keyboard and controllers will sound and
control the external tone generator. (The MIDI channel of
the external tone generator must match the MIDI Channel
of the track that is set to EXT, EX2 or Both.)
If you wish to use the SEQUENCER mode of the instrument
as a 16-track multi-timbral tone generator, select INT or
Both. For more information, see “Status” on page 478 of the
PG.
Synchronizing the sequencer with an
external MIDI device
The record/playback tempo of NAUTILUS’s sequencer can
be synchronized to an external MIDI device such as a
sequencer or rhythm machine. For more information, see
“Synchronizing the playback of arpeggiator or sequencer”
on page 938 of the PG.

Korg NAUTILUS 88 Specifications

General

MIDI	In, Out, Thru
Keyboard	88-key RH3 (Real Weighted Hammer Action 3)
Sound Engines	9 sound engines
Effects	12 insert effects, 2 master effects
Display	8-inch (800 x 480 pixels) TouchView display
Sequencer	16-track MIDI sequencer
Sampling	Open Sampling System
User Memory	Approx. 60 GB SSD
External Storage	USB Flash Drive
Controllers	Joystick
Audio Outputs	L/MONO, R
Audio Inputs	L/MONO, R (1/4" jacks)
USB	Type A
Pedal Inputs	Damper, Assignable
Weight	23.1 kg / 50.93 lbs
Dimensions	1, 437 x 387 x 139 mm / 56.57" x 15.24" x 5.47"
Power Supply	AC adapter (included)