User Sample Banks Saving User Sample Banks
153
Creating combined or stripped-down KSCs
The great thing about User Sample Banks is that they let you
use their data by reference, instead of by copying and editing
the data itself. Let's say that you have three User Sample
Banks: CoverBand_UserBank.KSC,
SoloProject_UserBank.KSC, and
Experimental_UserBank.KSC. You can then create
additional KSCs to do any of the following:
• Combine all three KSCs into a single master KSC, which
you can load in a single step
• Create different stripped-down versions of
CoverBand.KSC, each containing the samples for a few
of the songs.
• Create a “best of” KSC with only your favorite samples
from the three KSCs.
All of these would take up very little additional space on the
drive, don't require any editing in SAMPLING mode, and
don't require you to edit the original data in any way.
To combine all three KSCs:
1. Save any data you’ve created in SAMPLING mode.
(The next step will erase all Sampling Mode Data.)
2. Load CoverBand_UserBank.KSC, using the Clear All
option.
This clears out all other sample data, so that the KSC you
save later will include only the data you’ve just loaded.
3. Load SoloProject_UserBank.KSC and
Experimental_UserBank.KSC, using the Append
option.
4. Save a new KSC with a different name (such as
Combined.KSC), with Include set to “Links to EXs
and User Sample Banks.”
This new KSC now links to all of the sample data from the
three individual KSCs.
To create a stripped-down version of CoverBand.KSC:
1. Save any data you’ve created in SAMPLING mode.
(The next step will erase all Sampling Mode Data.)
2. Load CoverBand_UserBank.KSC, using the Clear All
option.
3. On the Global Sample Management page, set the
Bank to CoverBand.KSC, and delete any unwanted
Multisamples or Drumsamples.
4. Save a new KSC with a different name (such as
CoverBandStripped.KSC), with Include set to “Links
to EXs and User Sample Banks.”
To create a “best of” KSC with only your favorite samples
from the three KSCs:
1. Save any data you’ve created in SAMPLING mode.
(The next step will erase all Sampling Mode Data.)
2. In MEDIA mode, browse into the
CoverBand_UserBank.KSC file.
3. Select one or more Multisamples (Multiple Select lets
you choose two or more at once).
4. Load the Multisamples using the Clear All option.
5. Load additional Multisamples or Drumsamples from
other UserBank.KSC files, using the Append Option.
6. Save a new KSC with a different name (such as
BestOfEverything.KSC), with Include set to “Links to
EXs and User Sample Banks.”
For more detailed step-by-step information on this approach,
see “Creating a new KSC by loading individual
Multisamples” on page 181.
To Next Page
Loading...
Need help?
General
