14
Settings that you make using Quick Edit will
return to the original saved settings if you
change programs or turn off the power before
Writing (see p.28).
Play mode
Play mode is the mode in which you will nor-
mally use the PX4D.
1. Selecting a program
You can choose from 100 user programs
(U00...U99) and 100 preset programs
(P00...P99). Use the ▲/▼ buttons to select a
program. Programs can be selected even when
you are in Rhythm & Bass mode, AUX Pitch
mode, or Phrase Trainer mode (except while
recording).
2. Master level
When the MASTER icon is lit, the value graph
will indicate the master level.
When you turn the Value dial to adjust the mas-
ter level, the master level value will be shown in
the program number / value display for several
seconds. The master level is remembered even
when the power is turned off.
Master level value
Program number display
Master icon
Value graph
You can also adjust the settings so that the ▲/
▼ buttons will adjust the master level. (See
p.16)
3. Bypass/Mute
When you press the TUNE/BYPASS button, the
PX4D will be bypassed, and the original sound
will be dry (no effect).
The effect chain will blink, and the display will in-
dicate “BYPASS” for approximately one second.
If you press and hold the TUNE/BYPASS but-
ton for longer than one second, the output sig-
nal will be muted.
To Next Page
Loading...
Need help?
General
