20
Up to 16 patterns can be connected. If you want
to create a chain of 15 or fewer patterns, select
“PTN END” for the last pattern.
Press the ENTER/REC button to exit the Chain
Pattern Select screen.
If you change the pattern location by turning
the value dial while holding down the
√
or
®
button, the pattern at which you were located
will be copied to the destination pattern loca-
tion. This function is convenient when you want
to place the same pattern again.
Phrase Trainer mode
An audio source from the AUX jack or a phrase
you play on your guitar or bass can be record-
ed, and played back repeatedly as a loop.
This provides a convenient way to practice by
playing along with the repeating phrase.
You can slow down the playback speed without
affecting the pitch, which can help you to learn
difficult phrases.
If you select “JAM” as the recording mode, the
rhythm you specified in Rhythm & Bass mode
will be recorded simultaneously with the guitar
or bass input, and looped.
1. Select the recording mode
In Play mode (except during bypass/mute or key
lock), Rhythm & Bass mode, or AUX Pitch mode,
press the PHRASE TRAINER button to enter
Phrase Trainer mode.
When you enter this mode, the recording mode
and time select screen will appear, and the
Phrase Trainer icon will blink. In this screen,
the PX4D will be ready to record.
Recording
mode
Phrase Trainer icon
Recording
time
The recording mode will cycle through the fol-
lowing choices each time you press the
PHRASE TRAINER button.
To Next Page
Loading...
Need help?
General
