Reference Guide
89
Reference Guide
Program
Parameters
1
5D Keyboard Tracking Intensity:
This parameter determines keyboard tracking intensity for the
specified keyboard area. Positive values will make high notes brighter. Negative values have the
opposite effect. For a value of 0, the Cutoff Frequency changes linearly with regard to key pitch.
For a value of –50, the Cutoff Frequency is the same for all notes.
Keyboard Tracking EG Time:
This parameter determines how the VDF1 EG Time parameters
are affected by keyboard tracking. It affects the VDF1 EG Attack, Decay, Slope, and Release Time
parameters equally. Although, the direction of change can be set independently for each
parameter. The Keyboard Tracking mode and Key parameters can be used to specify the keyboard
area that is affected.
5E Attack, Decay, Slope, Release Times:
These parameters determine whether the VDF1 EG Time
parameters are reduced or increased with keyboard tracking. For a negative (–) value, notes above
the specified key will have their VDF EG times increased. For a positive (+) value, notes above
the specified key will have their VDF EG times decreased. A setting of 0 means no effect.
Cutoff frequency
C-1 G9Key
Int =0
Int = –50
Int <–50
Int >0
(keyboard tracking mode: ALL)
Time
C-1 G9Key
–
+
When keyboard mode set to
HIGH, EG Time changes
(5E parameters set to –)
VDF EG Time parameter
settings (all parameters +)
Effect on low notes Effect on high notes
Note off Note off Note offNote on Note on Note on
To Next Page
Loading...
Need help?
General
