Koso RX2N GP - 4-10 Target Speed and Distance Timer Settings

4 -1 0 The target speed timer 1 target distance timer setting 7'~s
4 -9 The fuel gauge resistance and insufficient fuel warning setting @
Press the Adjust button to choose the setting
number.
Lt. Now the insufficient setting number is flashlng!1
~ The insufficient fuel warning setting
range: 10-50 %. Setting unit: 10 Yo .
Press the Select button to continue the function
setting.
E X. the setting is changed from 30 % to 20 %.
~ When you leave this screen, the setting
is finished.
If YOu just wont to make t/ils tunction settinq. you could
<It' hold down the Select button tor 3 secondS to bo ck to
fl)
the main screen.
" ......... .
:
"
(~ 1
: l ..... \I I ...
. --
~, ." 'I \ '"
......... ' ....
In setting screen press the Select button 16
times to enter the target speed timer setting
screen.
Press the Adjust button to choose the setting
number .
E X. The target speed timer setting is 0-50 kmlh
and the target distance timer setting is 11 32 milE
(50 M).
Lt. Now the _ and target speed number is
flashing!
~ The target speed timer setting range:
30-360 km lh (20- 220 MPH).
Setting unit: 5 km lh (MPH).
Lt. The setting unit will change together with the
speed unit setting (4-1).
Press the Select button to enter the target
distance timer warn ing setting.
EX. Now the target speed timer is changed frorr
0-50 kmlh to 0-110 kmlh.
Press the Adjust button to choose the setting
number.
Lt. Now the Il!ll!! and target distance number is
flashing!
~ The target distance timer setting range
50-1,000 M (1132-20/3 2 mile).
Setting unit:
50 M (1/32 mile).